SeaKlear Brominating Tablets

In stock

Easy and very effective, SeaKlear® Brominating Tablets will protect your hot tub or spa from organic threats and bacteria. Not only will this product eliminate chlorine and chemical odors, but it is also less irritating than other brominating products on the market. Simply add a half-ounce of product per 100 gallons of water to your feeder, and again whenever you refill or drain your spa. Afterwards, allow your water to circulate for a minimum of 15 minutes.

SeaKlear Spa Brominating Tablets are an easy and effective way to add bromine to your spa or hot tub, protecting it from bacteria and other organic threats. Bromine not only eliminates the foul chemical odors of chlorine, but is less irritating to skin and eyes.

These tablets are extremely easy to use. Simply add the slow-dissolving tablets to your floater or feeder for a continuous level of bromine circulating throughout your pool. They continue to remain effective over a much broader pH range than chlorine. Add 1/2-ounce of sodium bromide for each 100-gallon of water before first use and whenever the spa is drained or refilled. Be sure to then let water circulate for at least 15 minutes.

Best of all, Spa Brominating Tablets are made to the exacting standards SeaKlear demands of all its products, allowing you to buy with confidence.

More Information
SKU 1140001
Manufacturer SeaKlear Spa Chemicals
UPC Number 662817905895
Product Weight 1.5 lbs or 680 g
Shipping Weight 1.65 lbs

Active Ingredient: Bromo-5, 5-dimethylhydantoin - 98%

Inert Ingredients: 2%

Total: 100%

Provides: 64.9% Available Bromine and 29% Available Chlorine

Keep pH between 7.2 and 7.6 and never allow it to fall below 7.0.

The treatment necessary for your spa will change considerably depending upon those factors that burden the disinfection system.  Some of the factors that will vary the required treatment are water temperature, bather load, exposure to windblown debris, and thunder or rain storms and length of filtration cycles.

Spas and Hot Tubs: Before Initially using Brominating Tablets in your spa or hot tub you will need to add ½ oz. of SeaKlear Sodium Bromide for each 100 gallons of water.  The same treatment should be followed for each 100 gallons of water.  The same treatment should be followed each time you drain and refill your spa or hot tub with fresh water.  Introduce 3 tablets per 300 gallons every 5-7 days or as needed to maintain an active bromine residual of 2 ppm at all times.  Spa water has a tendency to foam and cloud; this is directly proportional to the amount the spa is used.  Cloudiness is due to the accumulation of body fats, oils and contaminants too small for the filtration equipment to remove, and is linked to rapid escalation of total dissolved solids in the water.  To a great extent, defoamers, clarifiers, as well as shock treatments, demineralizers, or sequestering agents can be used to clear the water.  When water clarification cannot be achieved, draining, cleaning, and refilling the spa is recommended.

Shipping & Delivery

Chemical orders typically ship within 1 business day via UPS.

Returns & Replacement Policies

Chemicals must be returned unused within 30 Days of purchase date. At time of receipt of returned parts, you will receive a refund less the shipping cost.

If you are unsure whether the chemicals you are ordering is correct, please contact us at 844-853-4235 to confirm you are ordering the correct products for your hot tub.

Customer Reviews
We're currently collecting product reviews for this item. In the meantime, here are some reviews from our past customers sharing their overall shopping experience.
Out of 5.0
Overall Rating
of customers that buy
from this merchant give
them a 4 or 5-Star rating.
Copyright © 2016 All rights reserved.